VPI Cliffwood черный CAPACIPER LP SIVER полностью новый Лицензированный

VPI Cliffwood черный Резинка 

 

The Table:

• 1.25”" thick textured vinyl covered non-resonant MDF chassis.

• 16" x 11" footprint

• 19” x 14” x6” overall size

• Aluminum Platter

• Platter rotates on an oil bath bearing

• The bearing has a PEEK thrust disc and machined graphite impregnated brass bushings using a Thompson Engineering 60 Rockwell case hardened shaft.

 

Tonearm:

• New 9” vertical Yoke type tonearm with lateral type bearing.

• Pivot to spindle: 223mm

• Effective length: 240.7mm

• Overhang: 17.7mm

• Offset angle: 22.85 degrees

• Average RMS distortion: .36%

• Damped machined aluminum armtube.

• Very pure copper wire, twisted with special insulating jacket.

• The armbase is upgradeable to a standard JMW 9 arm.

 

Additional Specifications:

Type                 Belt drive (manual turntable)

Motor               600 RPM AC Motor - 2 speed pulley

Turntable Platter     Aluminum

Diameter           11.81” (30.0 cm)

Turntable Speeds    33.3 RPM and 45 RPM

Cartridge           VPI/Grado Green

Dimensions         18.5” (470 mm) W x 13.5” (343 mm) D x 4.3” (109 mm)H

Weight             12.9 lbs. (5.9 kg)

 

Cartridge Specifications:

Frequency Response: 10-50
Principal: MI
Channel Separation at 1KHz: 30
Input Load: 47K
Output at 1KHz (5CM/sec.): 5mV
Recommended Tracking Force: 1.5
Stylus Type: Elliptical
Inductance: 45mH
Resistance: 475
Compliance CUs: 20
Stylus Replacement (U=user): U